Hubei Daly LPG Cylinder Manufacturer CO., LTDAbout UsHubei Dali Container Manufacturing Co., Ltd. "Hubei Dali Container Manufacturing Co., Ltd" is headquartered in Xiantao City, Hubei Province. Established in 1981, it is the designated production plant of LPG bottles and other pressure vessels approved by the State Inspection and Quarantine Administration. The Deputy Director of LPG Cylinder Professional Committee of China Construction Machinery Association is a professional container manufacturer integrating R&D, manufacturing, sales and service. The company has two subsidiaries, Xiantao Dali Container Manufacturing Co., Ltd. and Lanzhou Juxing Industry and Trade Co., Ltd. with headquarters area of 220,000 square meters. It h
Cylinder inspection technology Dry cylinder operation steps are as follows
1. When discharging water at the end of the cylinder test, the bottle mouth should be kept down for a period of time to make the residual water in the bottle clean.
2. Set the bottle mouth downward (or upward) on the drying rack, insert the metal tube into the bottle about 150 mm from the bottom of the bottle, and connect it with the gas pipeline.
3. Connect the power supply of blower and electric heating furnace; the temperature of hot air coming out of electric heating furnace can be observed from the thermometer on the auxiliary pipe, which is generally controlled at 70-75 profit.
When the temperature is too high, the power supply of the heating furnace should be cut off and connected after the temperature is lowered. Each batch of cylinders is dried for about 20-30 minutes.
4. After unloading the cylinder from the drying rack, check the drying condition in the bottle by means of a small bulb. If it has been thoroughly dried, the bottle valve can be assembled.
